• The NT-208Y is Campro’s highly flexible and profitable CNC Turning Center
  • High performance heavy duty box guideways, 30 Degree cast iron inclined bed to ensure quick chip evacuation.
  • Our NT-208Y series CNC Turning Center is based on a high quality cast iron bed for superior rigidity and anti-vibration characteristics.
  • 30 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Specifications & Construction

Working Area
Swing over bed26.74”
Swing over cross slides16.35”
Maximum turning diameter15.74”
Maximum turning length20.47”
X Axis Travel8.66”
Y Axis Travel3.93”
Z Axis Travel24.8”
Rapid Traverse787 / 393 / 945 IPM
Spindle Motor15 / 20 HP
Maximum Speed4,200 RPM
Hydraulic Chuck10"
Spindle NoseA2-6
Hole Through Draw Tube2.05”
Tooling styleBMT-55
Turret Type12 – Servo driven
One Axial and one Radial BMT live holder included
Quill Diameter3.15”
Tailstock Travel1.81”
Quill Travel4.72”
Quill TaperMT - #4
Floor Space Required (W X D)151.14” X 76.77”
Machine Weight9,150 LBS
Standard Power Source205-235 Volts / 3 Phase / 60HZ
Power Capacity Minimum57 Amps

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Control Specifications – Fanuc OiM-F Conversational Control

  • 8.4” color LCD screen Color graphics
  • Simultaneous Controlled Axis
  • Least input Increment on X and Z is .001 mm Least command increment on X and Z is .001mm Inch/Metric Conversion (G20/G21)
  • Interlock on All Axes Machine Lock on All Axes Emergency Stop
  • Stored Stroke Check 1, 2, 3, Mirror Image
  • Backlash Compensation
  • Unexpected disturbance torque detection Stored pitch compensation
  • Automatic Operation (Memory) MDI Operation
  • Search Function (Sequence, Program) Program restart
  • Dry Run Single Block Buffer Register
  • Manual Handle Interrupt
  • Manual Jog Feed (Rapid, Jog, Handle) Manual Handle Feed Rate (x1, x10, x100)
  • Feed Command (F Code Feedrate Direct Command) Feedrate Override 0-200% (10% Unit)
  • Jog feed 0-5,000 mm/min (197 ipm)
  • Rapid traverse override (F0, F25%, F50%, F100%) Override Cancel
  • Rapid Traverse Bell-Shaped Acceleration/Deceleration Block Skip
  • Exact Stop Mode / Exact Stop (G61/G09) Dwell (G04)
  • Helical Interpolation Threading/Synchronous Feed Manual Reference Point Return 1st Reference Point Return
  • G28 Reference Point Return Check
  • G27 2nd Reference Point Return
  • G30 3rd and 4th Reference Point Return

(484) 892-6333