Campro-USA-Banner.jpg

CPV-1050B   4 + 1 12" Trunnion

FEATURES

Innovative Design Concepts

  • Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.

  • Box ways on all 3 axes greatly upgrades stability and dampening capability.

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.

  • Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

SPECIFICATIONS & STRUCTURE

Specifications

Capacity


X axis travel: 42”

Y axis travel: 20.9”

Z axis travel: 30.7”

Allowable table load: 2200 pounds

Table T Slots - width x slot spacing: .708" x 3.937" - (5)




Spindle


Spindle nose to table top: 3.9" - 34.6"

Spindle Bearing Diameter: 2.8"

Column to spindle center: 23.2"

Spindle taper: CAT 40 Big Plus

Spindle speed: 12,000 RPM

A.C. spindle motor (30 min.): 20 HP

Spindle torque (30 min): 132 FT-LBS.

Spindle Driving Method: Belt Drive




Automatic Tool Changer


ATC Type: Twin Arm Type

Number of Tools: 24

Tool Shank: CAT 40

Max. Tool Dia.: 3.1” (80 MM)

Max tool Diameter (No Adjacent Tool): 5.9” (150 MM)

Max. Tool Length: 9.8” (250 MM)

Max. Tool Weight: 15.4 lbs. (7 KG

Tool Selection: Random Bi-Directional




Trunnion Table


Table Diameter: 12.6"

Maximum Workpiece Diameter: 15.75"

Maximum Workpiece Height: 12.0"

Maximum Workpiece Weight: 220 pounds




Motion


X and Y axis rapid traverse rate: 1,181 IPM (30 M/MIN)

Z axis rapid traverse rate: 1,181 IPM (30 M/MIN)

Cutting feed rate: 393 IPM (10 M/MIN)

Slide Type: Box Ways

Least command increment: .001mm,

Positioning accuracy: +/- .00020" (full stroke)

Repeatability: +/- .00008"




General


Floor Space Required (W x D): 125" x 96"

Height: 120"

Machine Weight: 13,700 lbs.

Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

Power Capacity: 53 Amps Minimum

Air Source Requirement: 85 – 115 PSI





* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Standard Features
  • Fanuc Oi-F PLUS Control

  • AI APC Contour Control

  • 12,000 RPM Spindle (Belt Drive)

  • Powerful 20 hp (30 min) high torque spindle motor

  • High Column (20.9” + 9.8”)

  • Cartridge Spindle Design

  • CAT40 Big Plus Spindle

  • 290 PSI CTS

  • Spindle Air Blow

  • Rigid tapping

  • Custom Macro B (User Definable)

  • Twin Arm 24 Tool ATC

  • Portable Manual pulse generator

  • Massive One-piece Meehanite cast iron bed

  • Chip Auger

  • Low friction Turcite mating way surfaces

  • Double Anchored, Pre-tensioned Ballscrews

  • Fast 1,181 IPM Rapid Traverse rate

  • Full enclosure splash guard

  • Flood coolant with large coolant tank

  • Work light

  • Operator call lamp (red, yellow, green)

  • Spindle load meter

  • Assembly and operation tools

  • Auto Power Off

  • Heat exchanger for Electrical Cabinet

  • Instruction manual, parts list, and electrical diagram

  • Fanuc operator and maintenance manuals
    WARRANTY-MACHINE:   One-Year
    WARRANTY-CONTROL:  Two-Years

CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333

Campro USA Blue Logo.jpg

5 Highland Avenue, Suite C

Bethlehem, PA 18017

linkedin-button-follow-us.png

© 2021 Campro USA. All rights reserved.

Campro USA Blue Logo.jpg

Call Today: (484) 892-6333