PV Series Main Characteristics

  • High Accuracy and High Rigidity
  • 25 hp, 6,000 rpm Japanese made Gear-head Spindle
  • 34 hp, 10,000 rpm Built-in Motor Spindle (Optional)
  • Single unit (monobloc) bridge
  • Largest 32-tools ATC system as standard
  • Dual built-in casting chip screw removal system with chip conveyor
  • Roller type linear guideways on X-axes and Y-axes

Environmental Design Concept

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
  • Big coolant tank with high pressure pump provide the most efficient coolant circulation
  • All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection

Specifications & Construction

Table loading area162.28” x 57.08”
Allowable table load22,046 lbs.
T Slots, width x spacing x # slots.86” X 8”
Spindle taperCAT-50 Big Plus
Spindle RPM6,000 RPM
Spindle Power Output (max 30 min.)25 HP
Spindle torque (max 30 min)459.5 ft. lbs.
Spindle Driving MethodGear Type
X axis travel165.35”
Y axis travel62.98”
Z axis travel29.52”
Spindle nose to table surface7.87” – 37.40”
Distance between Columns68.89”
Rapid Traverse X and Y axis787 IPM
Rapid Traverse Z axis629.9 IPM
Automatic Tool Changer:
Number of Tools32
Tool ShankCAT 50 Big Plus
Max. Tool Dia.4.92
With adjacent pocket open8.46
Max. Tool Length17.38 inches
Max. Tool Weight44.1 lbs.
Tool Selection MethodRandom
Tank Capacity:
Coolant Tank53 Gallons
Lubricating Tank.5 Gallons
Hydraulic Tank30 Gallons
Power Supply:
Electric Power Supply Voltage / KVA220V 3 Phase (60HZ) / 40
Minimum Air Supply85 PSI (3/8 ID Supply Hose)
Feed and Accuracy:
Cutting feed rate393 IPM
Least command increment.001mm
Positioning accuracy+/- .00020" (full stroke)
Repeatability+/- .00008"
Floor Space Required (L X W)425.2" x 188.97"
Machine Weight66,138 lbs.

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Base Structure

  • Extra heavy load recirculating roller linear guideway on X-axis and Y-axis
  • Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min
  • Automatic lubrication to the sliding points
  • Final laser inspection and ball bar testing ensure repeatability and positioning accuracy
  • Linear scales for high precision feedback system (Optional)

(484) 892-6333