PV-5221

Features

PV Series Main Characteristics

  • High Accuracy and High Rigidity
  • 25 hp, 6,000 rpm Japanese made Gear-head Spindle
  • 34 hp, 10,000 rpm Built-in Motor Spindle (Optional)
  • Single unit (monobloc) bridge
  • Largest 32-tools ATC system as standard
  • Dual built-in casting chip screw removal system with chip conveyor
  • Roller type linear guideways on X-axes and Y-axes

Environmental Design Concept

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
  • Big coolant tank with high pressure pump provide the most efficient coolant circulation
  • All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection

Specifications & Construction

SpecificationsPV-5221
Capacity:
X axis travel204.72” (5200MM)
Y axis travel82.68” (2100MM)
Z axis travel31.49” (1000MM)
Table loading area196.85 x 66.93” (5000x1700MM)
Allowable table load26,455 lbs (12,000kg)
Table T Slots – (W x # slots)22 x 9 (0.86X9MM)
Spindle:
Spindle nose to table surface9.84” – 49.21”
Distance between Columns68.89” (1,750 MM)
Spindle speed6,000 RPM
Spindle Power Output (cont/max.) (max 30 min.)25HP (15 /1 8.5)
Spindle torque (max 30 min)384 FT-LBS (521 Nm.)
Spindle Driving MethodGear Type
Automatic Tool Changer:
ATC TypeTwin Arm Type
Number of Tools32
Tool ShankCAT 50 BIG PLUS
Max. Tool Dia.4.92” (125 MM)
Max. Tool Length17.38” (350MM)
Max. Tool Weight44 lbs. (20 KG)
Tool Selection MethodRandom Bi-Directional
Tool Change Time TOOL-TOOL3.5 sec
Tool Change Time CHIP-CHIP7 sec
Motion:
Rapid Traverse X, Y, Z10 / 12 / 12 (393.7 / 472.44 / 472.44ipm)
Cutting feed rate314.96 ipm
Slide TypeX Y LM Guide, Box on Z
Least command increment.001mm
Positioning accuracy+/- .00020" (full stroke)
Repeatability+/- .00008"
Tank Capacity:
Coolant TankGallons
Lubricating TankGallons
Hydraulic TankGallons
General:
Floor Space Required (L X W)503.94 x 196.85” (12,800x5000MM)
Height165.35” (4200MM)
Machine Weight92,594 lbs (42,000 kg)
Standard Power Source Requirement – Fanuc205-235 V / 3 Phase/60HZ
Power Capacity105 AMPS (40 KVA)
Minimum Air Supply85 – 115 PSI (3/8 ID Air Hose)

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Base Structure

  • Extra heavy load recirculating roller linear guideway on X-axis and Y-axis
  • Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min
  • Automatic lubrication to the sliding points
  • Final laser inspection and ball bar testing ensure repeatability and positioning accuracy
  • Linear scales for high precision feedback system (Optional)

CONTACT US TODAY FOR MORE INFORMATION
(484) 892-6333