Campro-USA-Banner.jpg

CPV-1050B 4 + 1

w/ 320 mm Trunnion

FEATURES

CPV-1050B 4+1
Innovative Design Concepts

  • Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.

  • Box ways on all 3 axes greatly upgrades stability and dampening capability.

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.

  • Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Download Brochure

SPECIFICATIONS & STRUCTURE

Specifications

Capacity

  • X axis travel: 42”

  • Y axis travel: 20.9”

  • Z axis travel: 30.7”

  • Allowable table load: 2200 pounds

  • Table T Slots - width x slot spacing: .708" x 3.937" - (5)


Trunnion Table

  • Table Diameter: 12.6"

  • Maximum Workpiece Diameter: 15.75"

  • Maximum Workpiece Height: 12.0"

  • Maximum Workpiece Weight: 220 pounds


Spindle

  • Spindle nose to table top: 3.9" - 34.6"

  • Spindle Bearing Diameter: 2.8"

  • Column to spindle center: 23.2"

  • Spindle taper: CAT 40 Big Plus

  • Spindle speed: 12,000 RPM

  • AC spindle motor: 25 HP

  • Spindle torque: 132 FT-LBS.

  • Spindle Driving Method: Belt Drive


Automatic Tool Changer

  • ATC Type: Twin Arm Type

  • Number of Tools: 24

  • Tool Shank: CAT 40

  • Max. Tool Dia.: 3.1” (80 MM)

  • Max tool Diameter (No Adjacent Tool): 5.9” (150 MM)

  • Max. Tool Length: 9.8” (250 MM)

  • Max. Tool Weight: 15.4 lbs. (7 KG

  • Tool Selection: Random Bi-Directional


Motion

  • X and Y axis rapid traverse rate: 1,181 IPM (30 M/MIN)

  • Z axis rapid traverse rate: 1,181 IPM (30 M/MIN)

  • Cutting feed rate: 393 IPM (10 M/MIN)

  • Slide Type: Box Ways

  • Least command increment: .001mm,

  • Positioning accuracy: +/- .00020" (full stroke)

  • Repeatability: +/- .00008"


General

  • Floor Space Required (W x D): 125" x 96"

  • Height: 120"

  • Machine Weight: 14,770 lbs.

  • Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

  • Power Capacity: 53 Amps Minimum

  • Air Source Requirement: 85 – 115 PSI


*Machine specifications and design are subject to change without prior notice due to on-going innovation.


Standard Features

  • Fanuc Oi-F PLUS Control

  • AI APC Contour Control

  • 12,000 RPM Spindle (Belt Drive)

  • Powerful 25 hp high torque spindle motor

  • High Column (20.9” + 9.8”)

  • Cartridge Spindle Design

  • CAT40 Big Plus Spindle

  • 290 PSI CTS

  • Spindle Air Blow

  • Rigid tapping

  • Custom Macro B (User Definable)

  • Twin Arm 24 Tool ATC

  • Portable Manual pulse generator

  • Massive One-piece Meehanite cast iron bed

  • Chip Auger

  • Low friction Turcite mating way surfaces

  • Double Anchored, Pre-tensioned Ballscrews

  • Fast 1,181 IPM Rapid Traverse rate

  • Full enclosure splash guard

  • Flood coolant with large coolant tank

  • Work light

  • Operator call lamp (red, yellow, green)

  • Spindle load meter

  • Assembly and operation tools

  • Auto Power Off

  • Heat exchanger for Electrical Cabinet

  • Instruction manual, parts list, and electrical diagram

  • Fanuc operator and maintenance manuals

  • WARRANTY-MACHINE: One-Year

  • WARRANTY-CONTROL: Two-Years


CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333