29.5" x 16.9" x 18.9"

  • Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.

  • The CNV-750 is equipped with high precision and heavy loading series linear guideways on all 3 axes. Automatic lubrication system for all linear guideways and ballscrews.

  • The base is reinforced by “A” type rib layout to upgrade absorption capability of vibration and is constructed of a box type structure for excellent rigidity. The machine structure is designed via Finite Element Analysis (FEA) and advanced 3D software.

  • Our counter balance system is equipped with a guide rail for increased stability, thus avoiding vibration during high feedrates and rapid traverse, this ensures machining accuracy.


The CNV-750 is designed for long-term high accuracy, and superior surface finishes. Classic manufacturing methods and ultra-rigid construction are combined with advanced technological features to provide exceptional value.


Please note that features and specifications are subject to change and should be verified at the time of order.




X axis travel: 30” Y axis travel:16.92” Z axis travel: 18.89” Spindle nose to table top: 3.93” – 22.83” Column to spindle center: 19.09”


Spindle speed: 12,000 RPM Spindle Motor, Max / Cont.: 15 / 10 Spindle taper: CAT 40 Big Plus Spindle Driving Method: Belt Drive

Automatic Tool Changer

ATC type: Twin Arm Type Tool Shank: CAT 40 Pull Stud: P-40T (45 Deg.) Number of tools: 24 Max tool dia.: 3.15” Max tool diameter (No Adjacent Tool): 5.1” Max tool length: 9.8" Max tool weight: 13.2 lbs. Tool Change Time TOOL - TOOL: 2.5 sec. Tool Change Time CHIP - CHIP: 6 sec. Tool Selection: Random Bi-Directional


Rapid traverse rate: 1,181 IPM All Axes Cutting feed rate: 393 IPM Least Command Increment: .001 mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008" Slide Type: LM Guideways


Air Source Requirement: 85 – 115 PSI (3/8 ID Supply Hose) Standard Power Source: 205-235 Volts / 3 Phase +/- 10% Power capacity: 40 Amps Minimum Floor space required (W x D X H): 89” X 106” in. X 104” in. Machine weight: 7,260 lbs.


Table Loading Area: 33.46” X 16.92”
Allowable Table Load: 660 lbs.
Table T Slots - width x slot spacing: .551” X 3.937” X 4”

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

  • Fanuc 0i-MF Plus Control (Package B)

  • AI APC Contour Control

  • 12,000 RPM Spindle (Belt Drive)

  • Powerful 15 hp (30 min) high torque spindle motor

  • Cartridge Spindle Design

  • CAT40 Big Plus Spindle

  • 290 PSI CTS Prep Only

  • Spindle Air Blow

  • Rigid tapping

  • Custom Macro B (User Definable)

  • Twin Arm 20 Tool ATC

  • Tool Change Time (Tool To Tool) 2.5 sec.

  • Tool Change Time (Chip to Chip) 6.0 sec.

  • Program and data protection key switch

  • Massive One-piece Meehanite cast iron bed

  • Chip Auger

  • 4th Axis Prep (no amplifier)

  • Chip Flushing System

  • Double Anchored, Pretensioned Ballscrews

  • Fast 1,181 IPM Rapid Traverse rate

  • Full enclosure splash guard

  • Flood coolant with large coolant tank

  • Work light (2)

  • Operator call lamp (red, yellow, green)

  • Spindle load meter

  • Assembly and operation tools

  • Auto Power Off

  • Heat exchanger for Electrical Cabinet

  • Instruction manual, parts list, and electrical diagram

  • Fanuc operator and maintenance manuals

  • WARRANTY: Machine: One Year, Parts

  • WARRANTY: Control: Two Year, Parts & Labor


Geometric accuracies are guaranteed only if machine is installed on foundation meeting the minimum requirements of the machine and local building codes.


(484) 892-6333