top of page
Campro USA Blue Logo.jpg
Campro-USA-Banner.jpg

JMH series (with 2 pallets changer)

Horizontal Machining Center

JMH400

(BT40) X630 / Y630 / Z630

Inquiry
E -Catalog
Video

The JMH400 horizontal machining center is equipped with an automatic pallet changer for 2 pallets. The tool cuts the workpiece from the side, allowing the chips to fall from the workbench. There is no need to manually clear the chips on the workbench, effectively improving production efficiency and reliability.

  • The major structural parts are ladle and box type integrated construction to fully overcome the cutting "Blind Rigidity" problem.

  • Three axes are mounted with heavy duty roller type linear guide ways, featuring heavy load resistance and rapid traverse.

  • The structural parts are symmetrical construction combined with "V" shape rib reinforcement that ensures they will remain deformation-free even after a long time.

  • The structural parts are manufactured from high quality cast iron, tempered for stress relier.

  • The advanced finite element andlysis software is applied for simulating structural stress. This assures the best possible machine rigidity, stability and dampening capacity.

Standard Accessories:


  1. Rotary type automatic pallet changer

  2. 1o indexing rotary table(JMH-400 std. 0.001o)

  3. Mitsubishi or Fanuc control

  4. 40 tools chain type ATC

  5. BT-40,JNH-400/JMH-500(40):10,000 rpm direct drive

  6. BT-50,JMH-500:6,000 rpm direct drive

  7. BT-50,JMH-630/800/1000:6,000 rpm Japan Gear head

  8. Rigid roller type linear guide way system

  9. Spindle curtain coolant

  10. Spindle oil cooler

  11. Heat exchanger for electrical cabinet

  12. 3 areas powerful chip flushing system

  13. Automatic lubrication system

  14. Fully enclosed splash guard

  15. Chain type chip conveyor with cart

  16. Leveling bolts and pads

  17. Tool box with tools

  18. Operation and maintenance manual

  19. Transformer(Export only) and Export packing

Optional Accessories:


  1. 0.001o or 5o indexing rotary table (JMH-400, 0.001o std.)

  2. 60,90,120 tools chain type magazine

  3. BT-40, 10,000~24,000 rpm direct drive(JMH-400/JMH-500)

  4. BT-50, 8,000~12,000 rpm direct drive(JMH-500)

  5. BT-50, 8,000 or 10,000 rpm direct drive (JMH-630~JMH-1000)

  6. Coolant through spindle(CTS-20/30/50/70 bar)

  7. 3 axes linear scales

  8. Oil skimmer

  9. Air conditioner for electrical cabinet

  10. Automatic tool length measuring device

  11. Automatic workpiece measuring device

  12. Coolant through tool holder 20/50 bar (without tool holder)

  13. CE Standard

  14. SIEMENS,HEIDENHAIN,FAGOR controller

  15. Pallet automation system(Flexible Manufacture System

  16. High torque Gear box(JMH-400/JMH-500)

  17. Ball screw coolant system(JMH-630/ MH-800/JMH-1000 std.)

All specifications and designs are subject to change without prior notice.

bottom of page