86.61” X 62.98” X 29.52”

PV Series Main Characteristics

  • High Accuracy and High Rigidity

  • 25 hp, 6,000 rpm Japanese made Gear-head Spindle

  • 34 hp, 10,000 rpm Built-in Motor Spindle (Optional)

  • Single unit (monobloc) bridge

  • Largest 32-tools ATC system as standard

  • Dual built-in casting chip screw removal system with chip conveyor

  • Roller type linear guideways on X-axes and Y-axes


Environmental Design Concept

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving

  • Big coolant tank with high pressure pump provide the most efficient coolant circulation

  • All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection




Table Loading Area: 90.54” x 57.08” Allowable Table Load: 13,227 lbs. T Slots, width x spacing x # slots: .86” X 8”


Spindle taper: CAT-50 Spindle RPM: 6,000 RPM Spindle Power Output (max/cont.) (max 30 min.): 15/18.5 (25 HP) Spindle torque (max 30 min): 384 ft. lbs. Spindle Driving Method: Gear Type


X axis travel: 86.61” Y axis travel: 62.98” Z axis travel: 29.52” Spindle nose to table surface: 7.87” – 37.40” Distance between Columns: 68.89” Rapid Traverse X and Y axis: 787 IPM Rapid Traverse Z axis: 629.9 IPM Slide Type: LM Guide on X & Y, Box Way on Z

Automatic Tool Changer

Number of Tools: 32 Max. Tool Dia.: 4.92 Max. Tool Length: 13.78 inches Max. Tool Weight: 55.1 lbs. Tool Selection Method: Random

Tank Capacity

Coolant Tank: 53 Gallons Lubricating Tank: .5 Gallons Hydraulic Tank: 30 Gallons

Power Supply

Electric Power Supply Voltage / KVA: 220V 3 Phase (60HZ) / 40 Minimum Air Supply: 85 PSI (3/8 ID Supply Hose)

Feed and Accuracy

Cutting feed rate: 393 IPM Least command increment: .001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"


Floor Space Required (L X W): 259.8" x 188.9" Height: 155.51” Machine Weight: 59,524 lbs.

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Base Structure
  • Extra heavy load recirculating roller linear guideway on X-axis and Y-axis

  • Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min

  • Automatic lubrication to the sliding points

  • Final laser inspection and ball bar testing ensure repeatability and positioning accuracy

  • Linear scales for high precision feedback system (Optional)


(484) 892-6333

Campro USA Blue Logo.jpg

5 Highland Avenue, Suite C

Bethlehem, PA 18017

© 2020 Campro USA. All rights reserved.

Campro USA Blue Logo.jpg

Call Today: (484) 892-6333