PV-3221

PV Series Main Characteristics

Environmental Design Concept

Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
Big coolant tank with high pressure pump provide the most efficient coolant circulation
All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection

Capacity

X axis travel: 42" Y axis travel: 20.9" Z axis travel: 30.7" Table Loading Area: 41.3” x 20.9” Allowable Table Load: 2200 pounds Table T Slots - width x slot spacing: .708” x 3.937” – (5)
Spindle

Spindle nose to table top: 3.9” – 34.6” Spindle nose diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM AC Spindle Motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
Automatic Tool Changer

ATC type: Twin Arm Type Number of tools: 24 Tool Shank: CAT 40 Max tool dia.: 3.1” Max tool diameter (No Adjacent Tool): 5.9” Max tool length: 9.8" Max tool weight: 15.4 lbs. Tool Selection: Random Bi-Directional
Motion

X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 393 IPM Slide Type: Box Ways Least command increment: 001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"
General

Floor space required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Extra heavy load recirculating roller linear guideway on X-axis and Y-axis
Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min
Automatic lubrication to the sliding points
Final laser inspection and ball bar testing ensure repeatability and positioning accuracy
Linear scales for high precision feedback system (Optional)