top of page
Campro USA Blue Logo.jpg
Campro-USA-Banner.jpg

NT-208SY

FEATURES

NT-208SY_product-page

  • The NT-208SY is Campro's highly flexible and profitable CNC Turning Center

  • High-performance heavy-duty box guideways, 30 Degree cast iron inclined bed to ensure quick chip evacuation.

  • Our NT-208SY CNC Turning Center is based on a high-quality cast-iron bed for superior rigidity and anti-vibration
    characteristics.

  • 30 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production
    Management System) represent the first step in smart manufacturing.

SPECIFICATIONS & CONTROL DETAILS

  • Capacity
    X axis travel: 41.3" Y axis travel: 20.9" Z axis travel: 30.7" Table Loading Area: 41.3” x 20.9” Allowable Table Load: 2200 pounds Table T Slots - width x slot spacing: .708” x 3.937” – (5)
  • Spindle
    Spindle nose to table top: 3.9” – 34.6” Spindle nose diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM AC Spindle Motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
  • Automatic Tool Changer
    ATC type: Twin Arm Type Number of tools: 24 Tool Shank: CAT 40 Max tool dia.: 3.1” Max tool diameter (No Adjacent Tool): 5.9” Max tool length: 9.8" Max tool weight: 15.4 lbs. Tool Selection: Random Bi-Directional
  • Motion
    X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 945 IPM Slide Type: Box Ways Least command increment: 001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"
  • General
    Floor space required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Control Specifications – Fanuc OiTF Plus Control

  • 10.4” color LCD screen

  • Color graphics

  • Simultaneous Controlled Axis

  • Least input Increment on X and Z is .001 mm

  • Least command increment on X and Z is .001mm

  • Inch/Metric Conversion (G20/G21)

  • Interlock on All Axes Machine Lock on All Axes

  • Emergency Stop

  • Stored Stroke Check 1, 2, 3,

  • Mirror Image

  • Backlash Compensation

  • Unexpected disturbance torque detection

  • Stored pitch compensation

  • Automatic Operation (Memory)

  • MDI Operation

  • Search Function (Sequence, Program)

  • Program restart

  • Dry Run

  • Single Block

  • Buffer Register

  • Manual Handle Interrupt

  • Manual Jog Feed (Rapid, Jog, Handle)

  • Manual Handle Feed Rate (x1, x10, x100)

  • Feed Command (F Code Feed Rate Direct Command)

  • Feed Rate Override 0-200% (10% Unit)

  • Jog feed 0-5,000 mm/min (197 ipm)

  • Rapid traverse override (F0, F25%, F50%, F100%)

  • Override Cancel

  • Rapid Traverse

  • Bell-Shaped Acceleration/Deceleration

  • Block Skip

  • Exact Stop Mode / Exact Stop (G61/G09)

  • Dwell (G04)

  • Helical Interpolation Threading/Synchronous Feed

  • Manual Reference Point Return

  • G27 Reference Point Return Check

  • G28 1st Reference Point Return

  • G30 2nd, 3rd. and 4th  Reference Point Return

  • Program Stop, Optional Stop, End of Program. M00, M01, M02, M30

  • Tape Code EIA RS-244/ISO 840 (Automatic Recognition)

  • Optional Block Skip (9 ea.)

  • Maximum Programmable Dimensions +/- 9999.9999” (+/- 8 digits)

  • Program Number O4 Digit

  • Absolute and Incremental Command

  • Decimal Point Input

  • Plane Selection G17. G18. G19

  • Work Coordinate System Setting (G52 – G59)

  • Work Coordinate Preset

  • Additional Work Coordinate System 48 pairs

  • Manual Absolute “On” fixed

  • Programmable Data Input G10

  • Sub Program Call

  • 4 Levels of Nesting Custom Macro

  • #100 to #199 Addition to Custom Macro

  • Common Variables #500 to #999 

  • Circular Interpolation by radius R

  • Canned Cycle (G73, G74, G76, G80 ~ G89)

  • Optional Chamfering / Corner R

  • Skip Function (G31)

  • Automatic Coordinate System Setting

  • Coordinate System Rotation

  • Programmable Mirror Image

  • Single direction positioning (G60)

  • External Data Input (Tool Offset, message, machine zero-point shift)

  • Cylindrical interpolation

  • AI Advance Preview Control (G5.1)

  • Polar Coordinate Command

  • Miscellaneous Function (M3 digits)

  • Miscellaneous Function Lock

  • Spindle Speed Command (S5 Digits, binary output)

  • Spindle Speed Override (50% ~ 120%)

  • 10% Unit Rigid Tapping

  • Cutter Compensation C (G40-G42)

  • Tool Length Measurement

  • Tool Length Compensation (G43, G44, G49)

  • Tool Offset Amount (+/- 6 Digits)

  • Tool Offset Pairs (400 Pairs)

  • Tool Life Management

  • Reader/Puncher Interface

  • RS232C

  • Memory Card input/output

  • Embedded Ethernet (100 Mbps)

  • Part Program Storage Length: 2 MB

  • Registered Programs 1,000 ea.

  • Memory Lock

  • Back Ground Editing

  • Extended Part Program Editing (Copy, Move, Change of NC Program)

  • Self-Diagnosis Function

  • History Display of Alarm and Operator Message

  • Help Function

  • Run Hour / Parts Count Display

  • Actual Cutting Feed Rate Display

  • Spindle Servo Setting Screen

  • Multi-language display (Selection of 5 Optional Language)

  • Erase CRT Screen Display (Screen Saver)

  • Bi-Direction Pitch Error Compensation

  • Tool Management Function

  • Protection of Data at 8-Levels

  • Tool Monitoring Function (HWTM – Built-on Fanuc Type)

  • Fanuc Manual Guide i Conversational Programming

  • Alpha i AC digital servo system with 1,000,000 pulse encoders

  • Full MDI keyboard

  • PCMCIA data card slot on left side of LCD for program input / output – up to 2GB storage

  • Advanced Preview Control (Look ahead of multi-blocks – 20 blocks look ahead)

  • Automatic Acceleration / Deceleration with Bell Shaped rapid acc/dec

  • 3 axes simultaneous control std. (4 axis opt.)

  • Scaling

  • Custom Macro B

  • High speed skip signal

CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333

bottom of page