top of page
Campro-USA-Banner.jpg

FEATURES

PV-4221 Product Page

PV Series Main Characteristics

​

  • High Accuracy and High Rigidity

  • 25 hp, 6,000 rpm Japanese made Gear-head Spindle

  • 34 hp, 10,000 rpm Built-in Motor Spindle (Optional)

  • Single unit (monobloc) bridge

  • Largest 32-tools ATC system as standard

  • Dual built-in casting chip screw removal system with chip conveyor

  • Roller type linear guideways on X-axes and Y-axes

 

Environmental Design Concept

​

  • Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving

  • Big coolant tank with high pressure pump provide the most efficient coolant circulation

  • All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection

SPECIFICATIONS & STRUCTURE

  • Capacity
    X axis travel: 42" Y axis travel: 20.9" Z axis travel: 30.7" Table Loading Area: 41.3” x 20.9” Allowable Table Load: 2200 pounds Table T Slots - width x slot spacing: .708” x 3.937” – (5)
  • Spindle
    Spindle nose to table top: 3.9” – 34.6” Spindle nose diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM AC Spindle Motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
  • Automatic Tool Changer
    ATC type: Twin Arm Type Number of tools: 24 Tool Shank: CAT 40 Max tool dia.: 3.1” Max tool diameter (No Adjacent Tool): 5.9” Max tool length: 9.8" Max tool weight: 15.4 lbs. Tool Selection: Random Bi-Directional
  • Motion
    X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 393 IPM Slide Type: Box Ways Least command increment: 001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"
  • General
    Floor space required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

STANDARD FEATURES

  • Fanuc Oi-MF PLUS Control (Package 1)

  • AI APC Contour Control

  • 6,000 RPM Spindle with Gear Head (10,000 RPM Built In is optional)

  • Spindle Oil Chiller

  • Powerful 25 HP (30 min) high torque spindle motor

  • High Column (37.4” Spindle nose to table)

  • Cartridge Spindle Design

  • CAT50 Big Plus Spindle

  • 1,000 PSI Coolant thru spindle prep

  • Spindle Air Blow

  • Rigid tapping

  • Twin Arm 32 Tool ATC

  • Portable Manual pulse generator

  • Program and data protection key switch

  • Massive One-piece Meehanite cast iron bed

  • X & Y Heavy Duty Linear Guides

  • Z axis Heavy Duty Box Way

  • Chip Auger

  • Chip Conveyor (W/ Bucket)

  • Double Anchored, Pre-tensioned Ballscrews

  • Fast X & Y - 787, Z - 630 IPM Rapid Traverse rate

  • Flood coolant with large coolant tank

  • Work light 

  • Heat exchanger for Electrical Cabinet

  • Automatic Lubrication Unit

  • Instruction manual, parts list, and electrical diagram

  • Fanuc operator and maintenance manuals

  • One-year Parts warranty: Parts

  • Two-year NC Control Warranty: Parts and Labor by control builder

​

Base Structure

  • Extra heavy load recirculating roller linear guideway on X-axis and Y-axis

  • Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min

  • Automatic lubrication to the sliding points

  • Final laser inspection and ball bar testing ensure repeatability and positioning accuracy

  • Linear scales for high precision feedback system (Optional)

​​

CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333

bottom of page