Call Today: (484) 892-6333
FEATURES
PV Series Main Characteristics
-
High Accuracy and High Rigidity
-
25 hp, 6,000 rpm Japanese made Gear-head Spindle
-
34 hp, 10,000 rpm Built-in Motor Spindle (Optional)
-
Single unit (monobloc) bridge
-
Largest 32-tools ATC system as standard
-
Dual built-in casting chip screw removal system with chip conveyor
-
Roller type linear guideways on X-axes and Y-axes
Environmental Design Concept
-
Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
-
Big coolant tank with high pressure pump provide the most efficient coolant circulation
-
All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection
SPECIFICATIONS & STRUCTURE
X axis travel: 204.72” (5200 mm)
Y axis travel: 82.68” (2100 mm)
Z axis travel: 31.49” (1000 mm)
Table loading area: 196.85 x 66.93” (5000 x 1700 mm)
Allowable table load: 26,455 lbs (12,000kg)
Table T Slots – (W x # slots): 22 x 9 (0.86mm X 9mm)
Spindle nose to table surface: 9.84” – 49.21”
Distance between Columns: 68.89” (1750 mm)
Spindle speed: 6,000 RPM
Spindle Power Output (cont/max.) (max 30 min.): 25HP (15 /1 8.5)
Spindle torque (max 30 min): 384 FT-LBS (521 Nm.)
Spindle Driving Method: Gear Type
X axis travel: 165.35”
Y axis travel: 82.68”
Z axis travel: 29.52”
Spindle nose to table surface: 7.87” – 37.40”
Distance between Columns: 86.61”
Rapid Traverse X and Y axis: 787 IPM
Rapid Traverse Z axis: 629.9 IPM
Tool Selection Method: Random
ATC Type: Twin Arm Type
Number of Tools: 32
Tool Shank: CAT 50 BIG PLUS
Max. Tool Dia.: 4.92” (125 mm)
Max. Tool Length: 13.7”
Max. Tool Weight: 44 lbs. (20 KG)
Tool Selection Method: Random Bi-Directional
Tool Change Time TOOL-TOOL: 3.5 sec
Tool Change Time CHIP-CHIP:7 sec
Rapid Traverse X, Y, Z: 10 / 12 / 12 (393.7 / 472.44 / 472.44ipm)
Cutting feed rate: 314.96 ipm
Slide Type: X Y LM Guide, Box on Z
Least command increment: 0.01 mm
Positioning accuracy: +/- .00020" (full stroke)
Repeatability: +/- .00008"
Coolant Tank: 53 Gallons
Lubricating Tank: .5 Gallons
Hydraulic Tank: 30 Gallons
Floor Space Required (L X W): 425.2" x 188.97"
Floor Space Required (L X W): 503.94 x 196.85” (12801 x 5000 mm)
Height: 165.35” (4200 mm)
Machine Weight: 92,594 lbs (42,000 kg)
Standard Power Source Requirement – Fanuc: 205-235 V / 3 Phase/60HZ
Power Capacity: 105 AMPS (40 KVA)
Minimum Air Supply: 85 – 115 PSI (3/8 ID Air Hose)
* Machine specifications and design are subject to change without prior notice due to on-going innovation.
Base Structure
-
Extra heavy load recirculating roller linear guideway on X-axis and Y-axis
-
Fast rapid feedrate on X-axis and Y-axis are 20 m/min, and Z-axis is 16 m/min
-
Automatic lubrication to the sliding points
-
Final laser inspection and ball bar testing ensure repeatability and positioning accuracy
-
Linear scales for high precision feedback system (Optional)
