PV-4226

Next >

FEATURES

Detailed Specs

Download Brochure

PV Series Main Characteristics

High Accuracy and High Rigidity
25 hp, 6,000 rpm Japanese made Gear-head Spindle
34 hp, 10,000 rpm Built-in Motor Spindle (Optional)
Single unit (monobloc) bridge
Largest 32-tools ATC system as standard
Dual built-in casting chip screw removal system with chip conveyor
Roller type linear guideways on X-axes and Y-axes

Environmental Design Concept

Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
Big coolant tank with high pressure pump provide the most efficient coolant circulation
All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection

SPECIFICATIONS & STRUCTURE

Specifications

PV 4226

CAPACITY

• X axis travel: 165.3” • Y axis travel: 102.3” • Z axis travel: 31.4” • Table Dimensions: 157.4” × 86.6” • Allowable table load: 30,864 lbs. • Table T Slots – width × No.: .86” – (9) • Spindle nose to table top: 7.87” – 39.30” • Column to spindle center: 24.8”

SPINDLE

• Spindle taper: CAT 50 Big Plus • Spindle speed: 6,000 RPM • A.C. spindle motor: 35 HP • Torque: 621 ft-lbs. • Spindle Bearing Diameter: 2.8”

MOTION / FEED

• X / Y / Z axis rapid traverse rate: 472 / 590 / 590 IPM • Cutting feed rate: 393 IPM • Slide Type: LM Roller Guideways • Least command increment: .001 mm • Positioning accuracy: ± .00020” (full stroke) • Repeatability: ± .00008”

AUTOMATIC TOOL CHANGER

• ATC Type: Twin Arm Type • Number of Tools: 32 • Tool Shank: CAT 50 • Max. Tool Dia.: 4.9” • Max tool Diameter (No Adjacent): 8.4” • Max. Tool Length: 13.7” • Max. Tool Weight: 44 lbs. • Tool Selection: Random Bi-Directional

GENERAL

• Floor Space Required (W × D × H): 425” × 216” × 165”• Machine Weight: 92,594 lbs.• Standard Power Source Requirement: 205-235 Volts 3 Phase / 60HZ• Air Source Requirement: 85 – 115 PSI

STANDARD FEATURES

Fanuc 0i-MF PLUS Type 1
AICC2+
6,000 RPM Spindle with Geared Head (10K Optional)
Spindle Oil Chiller
Powerful 35 HP high torque spindle motor
High Column (37.4” Spindle nose to table)
Cartridge Spindle Design
CAT50 Big Plus Spindle
290 PSI Coolant Through Coolant
Spindle Air Blow
Rigid tapping
Twin Arm 32 Tool ATC
Portable Manual pulse generator
Program and data protection key switch
Massive One-piece Meehanite cast iron bed
X & Y Heavy Duty Roller Type Guideways
Z axis Heavy Duty Box Way
Two Chip Augers
Chip Conveyor (W/ Bucket)
Double Anchored, Pre-tensioned Ball screws
Fast X & Y – 472 / 590 IPM, Z - 590 IPM Rapid Traverse rate
Flood coolant with large coolant tank
Work light
Heat exchanger for Electrical Cabinet
Automatic Lubrication Unit
Instruction manual, parts list, and electrical diagram
Fanuc operator and maintenance manuals
One-year Parts warranty: Parts w/o Labor
Two-year NC Control Warranty: Parts and Labor

Base Structure

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

One-piece Meehanite cast iron base with dual chip slots for fast evacuation and exceptional stability
Wide-span saddle fully supports the table in all positions to eliminate overhang
Dual-column bridge design reinforced with heavy ribbing and a stepped layout for excellent rigidity and vibration damping
Robust box-type crossbeam engineered to resist deflection under load
Heavy-duty roller linear guideways on the X and Y axes combined with box ways on the Z axis
Double-nut, pre-tensioned, C3-class ball screws anchored at both ends
Oversized AC servo motors directly coupled to each ball screw

CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333

REQUEST DEMO