top of page
Campro USA Blue Logo.jpg
Campro-USA-Banner.jpg

CPL-3010SY

FEATURES

CPL-3101SY Product Page

The CPL-3010SY was designed to meet our customers’ needs for a flexible, highly productive and cost effective machine. The CPL-3010SY turning center is designed to provide superior rigidity, accuracy and surface finishes. Milling and drilling with live tooling, a true Y-Axis plus a sub-spindle adds to the versatility of this model. High-speed turret indexing, quick spindle acc./dec. times and fast rapid traverse rates minimize non-cutting time. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value. 

SPECIFICATIONS & FEATURES

  • Capacity
    X axis travel: 42" Y axis travel: 20.9" Z axis travel: 30.7" Table Loading Area: 41.3” x 20.9” Allowable Table Load: 2200 pounds Table T Slots - width x slot spacing: .708” x 3.937” – (5)
  • Spindle
    Spindle nose to table top: 3.9” – 34.6” Spindle nose diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM AC Spindle Motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
  • Automatic Tool Changer
    ATC type: Twin Arm Type Number of tools: 24 Tool Shank: CAT 40 Max tool dia.: 3.1” Max tool diameter (No Adjacent Tool): 5.9” Max tool length: 9.8" Max tool weight: 15.4 lbs. Tool Selection: Random Bi-Directional
  • Motion
    X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 393 IPM Slide Type: Box Ways Least command increment: 001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"
  • General
    Floor space required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Standard Features
  • Y axis 4.33”( +/- 2.16”)

  • Live Tooling with C-axis

  • Sub-spindle with Full C axis

  • Wide full power range 30 HP Built In Spindle Motor

  • 3.00” Bar capacity

  • 4,000 RPM Spindle

  • 0.2 Second turret indexing

  • Rigid one piece box design bed

  • Separate 65 gallon coolant tank

  • Pretension ball screws with “Double anchored” support system on all three axes

  • 787 IPM rapid traverse

  • 18,739 Lbs. machine weight

  • FANUC 0iTF Control

CONTACT US TODAY FOR MORE INFORMATION

(484) 892-6333

bottom of page