top of page



NT-2510SM Product Page

X: 8.27” + 1.18” / Z: 20.87”

  • The NT-2510SM is Campro’s highly flexible and profitable twin spindle CNC lathe.

  • Through the use of synchronized control, the 10” Main spindle / 8” Sub
    spindle can be utilized to complete the greatest amount of primary and secondary turning operations as possible, all in one compact platform.

  • High performance heavy duty box guideways, 30 Degree cast iron inclined bed to ensure quick chip evacuation.

  • Our NT-2510SM series CNC lathe is based on a high quality cast iron bed for superior strength and vibration characteristics.

  • 30 cast iron inclined bed ensure quick chip evacuation. The new CPMS (Campro Production Management System) represents the first step in smart manufacturing.


  • Capacity
    X axis travel: 42" Y axis travel: 20.9" Z axis travel: 30.7" Table Loading Area: 41.3” x 20.9” Allowable Table Load: 2200 pounds Table T Slots - width x slot spacing: .708” x 3.937” – (5)
  • Spindle
    Spindle nose to table top: 3.9” – 34.6” Spindle nose diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM AC Spindle Motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
  • Automatic Tool Changer
    ATC type: Twin Arm Type Number of tools: 24 Tool Shank: CAT 40 Max tool dia.: 3.1” Max tool diameter (No Adjacent Tool): 5.9” Max tool length: 9.8" Max tool weight: 15.4 lbs. Tool Selection: Random Bi-Directional
  • Motion
    X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 393 IPM Slide Type: Box Ways Least command increment: 001mm Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008"
  • General
    Floor space required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI

* Machine specifications and design are subject to change without prior notice due to on-going innovation.

Standard Features
  • 3-jaw power chuck

  • Hard jaws = one set; Soft jaws = three sets

  • Manual tailstock

  • Chain type chip conveyor with bucket

  • Coolant system

  • Oil skimmer

  • Tool box

Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals


WARRANTY-Machine: One Year, Parts

WARRANTY-Control: Two Years, Parts & Labor.


(484) 892-6333

bottom of page